Network Instruments GigaStor 114ff Manual de usuario descargar pdf (Pagina 125)

VPN

Appendix A TCP/IP ports, NAT, and VPN

125

rev. 1

Figure 86 NAT

If the Observer is outside the network where the probe is running,

you must forward port 25903 from the Observer’s address. You must

use the NAT outside IP address as the probe’s IP address when trying

to redirect and/or administer the probe from Observer.

VPN

Using VPN is an easy way to get access to a probe on a remote LAN.

The most common configuration change is when redirecting the

probe. You must manually enter the Observer IP address. By default,

Observer will use the LAN IP address configured to Observer. You

must enter your VPN client’s IP address by selecting “Redirect to a

specified IP address” in the probe redirection dialog.

Select “Redirect to a specified IP address” in the Redirecting Probe or

Probe Instance dialog (Figure 86) and type the VPN client’s IP

address.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 145 146

Sin comentarios

Network Instruments GigaStor 114ff Manual de usuario Pagina 125